Tube interceptor to tap off B+ for 122 type Leslie control. Includes internal resistor in series with the flying lead. This unit plugs in in place of the 6X4 tube, and the 6X4 plugs into it. Solid 1 piece gold plated socket/pin combos. This part is used on the AO-28 pre amps found in Hammond B3, C3, A-100, RT-3, D-100 Organs.

Used to connect to a 9-pin organ to an 11-pin Leslie Speaker. (Will not work in the reverse)

Chassis mounting ring for mounting amphenol connectors to Leslie Speakers or other amphenol connector standoffs. Comes with retainer ring.

Used to add additional tone cabinets or 6-pin Leslie Speakers of the same series. (Cannot mix 122 with 147 series.)

Used to run two 11-pin Leslies when organ has only socket. The Leslies must be of the same type.

This adapter is used to connect any single channel Hammond organ with a 11 pin Leslie connector such as models XB-2, XB-5, XB-3, XK-2, and XK-3, to single channel Leslie speakers models 21, 22, 32, 122, 122A, 142, 222, and 242.

This adapter is used to connect any single channel Hammond organ with a 11 pin Leslie connector such as models XB-2, XB-5, XB-3, XK-2, and XK-3 to single channel Leslie speakers models 147, 147A, 247, 145, 245, and 44W.

This kit provides an 11 pin Leslie outlet on most 1 to 4-channel organs with internal speakers. Provisions exist within this kit for channel mixing, thus care must be taken in connecting the proper channels of the organ to the appropriate Leslie speaker channels. Included in this kit is a Main/Echo and Tremolo/Chorale switch.

This kit provides an 11 pin Leslie outlet on Hammond Organ models B2, C2, B3, C3, RT, RT2, and RT3, and connects to Leslie speaker models 315, 415, 422, 715, 716, 722, 723, 771, 815, 822, and 122XB. Included in this kit is a Rotary/Main/Mix and Tremolo/Chorale switch.