Call for current pricing      ( Made in the USA! )

At Last, turn your older "single speed" Leslie® into its newer "two speed" counterpart. The Hamptone Motor Control performs this by synchronously switching the power on / off to the motors at precisely the correct intervals to achieve reduced speeds from a single speed motor. Power is never interrupted when current is flowing through the motors to provide quiet operation (no switching noise on AC power, i.e. fed into amp). It does not achieve this by varying current or voltage applied to the motor as these methods can cause motor damage. This unit is amazing ! View the brochure Installation Procedure Specifications Slow Speed Selection * 4 DIP switches (located on side of unit) Power * 120VAC Leslie®Model Compatibility * 21E, 21H, 22H, 22R, 31A, 31H, 44W, 46W, 45, 47, 50, 51C

Designed specifically to supply a stable 60 HZ source for tone wheel generator organ motors. Allows organ to play precisely in tune even in countries where the line frequency is not 60 HZ or locations where the line frequency is not stable or accurate. Does not require additional switches or changes in the organ starting procedure. INPUT: 117 VOLTS 25 / 100 HZ OUTPUT: 110 VOLTS 60 HZ * SC-60D-1 For self starting organs LINE VOLTAGE AND FREQUENCY IN VARIOUS COUNTRIES COUNTRY VOLTS/FREQ. Australia 240 / 50 Austria 220 / 50 Barbados 110 / 50 Belgium 220 / 50 China 110 / 50 Denmark 220 / 50 Egypt 220 / 50* France 220 / 50 Germany 220 / 50 Great Britain 240 / 50 Greece 220 / 50 Hungary 220 / 50 Iceland 220 / 50 India 220 / 50 Ireland 220 / 50 Israel 220 / 50 Italy 220 / 50* Jamaica 110 / 50 Japan 110 / 50* Kenya 220 / 50 Kuwait 240 / 50 Martinique 220 / 50 Mozambique 220 / 50 Netherlands 220 / 50 Norway 220 / 50 Pakistan 220 / 50 Poland 220 / 50 Russia 220 / 50 Singapore 230 / 50 South Africa 220 / 50 Spain 110 / 50* St. Lucia 220 / 50 St. Vincent 220 / 50 Sweden 220 / 50 Switzerland 220 / 50 Turkey 220 / 50 * Line voltage / frequency may vary in some parts of the country For product usage chart, click thumbnail to the left

Designed specifically to supply a stable 60 HZ source for tone wheel generator organ motors. Allows organ to play precisely in tune even in countries where the line frequency is not 60 HZ or locations where the line frequency is not stable or accurate. Does not require additional switches or changes in the organ starting procedure. INPUT: 117 VOLTS 25 / 100 HZ OUTPUT: 110 VOLTS 60 HZ * SC-60D-2 For non self starting organs LINE VOLTAGE AND FREQUENCY IN VARIOUS COUNTRIES COUNTRY VOLTS/FREQ. Australia 240 / 50 Austria 220 / 50 Barbados 110 / 50 Belgium 220 / 50 China 110 / 50 Denmark 220 / 50 Egypt 220 / 50* France 220 / 50 Germany 220 / 50 Great Britain 240 / 50 Greece 220 / 50 Hungary 220 / 50 Iceland 220 / 50 India 220 / 50 Ireland 220 / 50 Israel 220 / 50 Italy 220 / 50* Jamaica 110 / 50 Japan 110 / 50* Kenya 220 / 50 Kuwait 240 / 50 Martinique 220 / 50 Mozambique 220 / 50 Netherlands 220 / 50 Norway 220 / 50 Pakistan 220 / 50 Poland 220 / 50 Russia 220 / 50 Singapore 230 / 50 South Africa 220 / 50 Spain 110 / 50* St. Lucia 220 / 50 St. Vincent 220 / 50 Sweden 220 / 50 Switzerland 220 / 50 Turkey 220 / 50 * Line voltage / frequency may vary in some parts of the country For product usage chart, click thumbnail to the left

60 cycles/117 volt only!

These motors are used, but are guaranteed for one year. This motor will work for Hammond Organ models, BV, CV, B2, C2, B3, C3, A-100, D-100, M2, M3, RT2, RT3, etc.

Rebuild your Leslie Speaker fast motors with our new kit. Complete instructions included!