BB Organ

Skip to Main Content »

Search Site
Welcome to BB Organ!
Contact us by email or (763) 571-8284

You're currently on:

Shop by

Shopping Options

Category
  1. Hammond Parts (4)
  2. Leslie Parts (3)
  3. Hamptone (1)
  4. Cables and kits (2)
  5. Trek II (3)
  6. Accessories (2)
Price
  1. $0.00 - $99.99 (8)
  2. $400.00 and above (1)

Newsletter

Newsletter
 

Search results for 'capacitor'

9 Item(s) Show per page
View as: Grid  List  Sort by Set Ascending Direction
Leslie electrolytic filter can capacitor
$49.00

If you still have the original filter can capacitor in your original Leslie amp, you need to change it! New electrolytic filter can capacitor for Leslie power amp. (122, 147, 145, 22H, 22R, 45, 47, 245, 222, 247, etc.)

Learn More

Add to Wishlist | Add to Compare

Hamptone H122SK2 Leslie Interface Kit w/echo (Call or email for pricing)
$0.00

Call or email for current pricing!   ( Made in the USA! )


The Hamptone H122SK2 (with Echo) connector kit is specifically designed to interface an A-100 / B3 / C3 / D-100 and other Hammond G-G terminal type organs to 122 type Leslie speakers. This kit also allows for speaker selection between either the internal speakers of a specific organ or tone cabinet and a 122 type Leslie. Specs The Hamptone H122SK2 unit controls the speed of a 122 series Leslie by coupling approximately 80Vdc onto each side of the balanced audio signal. It does this through a pair of high grade polypropylene capacitors instead of a transformer. The result is better frequency and phase response, giving a much more "transparent" sound. Installation Procedure for H122SK2

Learn More

Add to Wishlist | Add to Compare

Hammond Generator Capacitor Kit
$99.00

Tonewheel Generator Filter Capacitor Replacement kit Hand-matched components designed to restore clarity, brightness, and consistency to the "Classic" Hammond Tonewheel Organ. This kit may be adapted for use with most any Hammond Tonewheel generator in addition to the models listed. For Hammond models: A, AB, B, BA, C, BC, AV, BV, CV, DV, E, RT, B2, C2, RT2, B3, C3, RT3, A-100, D-100, R-100, G-100 etc. plus Spinet Models, L-series, M-series, T-series and other tone generator equipped spinets.

Learn More

Add to Wishlist | Add to Compare

Hammond capacitor kit for vibrato line box
$49.00

Specify model and serial number during checkout!


Vibrato Line Box Rebuild Kit Hand-matched components designed to restore clean defined sound to a tonewheel generator Hammond Organ Vibrato system. This kit will improve overall vibrato sound and clarity.

Learn More

Add to Wishlist | Add to Compare

Hammond self starting run motor (L-100 series)
$90.00

L-100 series self starting run motor with capacitor. These are used units, but come with a 1 year warranty!


117 volt 60 cycle!

Learn More

Add to Wishlist | Add to Compare

Trek II CPR-28 PRE-AMP
$448.00

The Trek II ® CPR-28 is a premium product designed to provide technicians with the means to restore like-new operation to aging AO-28 pre-amps which are used in classic Hammond® A-100, B-3, C-3, D-100 and RT-3 organs.  The CPR-28 replaces every resistor and fixed capacitor in the pre-amp including the two multi-section can capacitors.  While not every tonewheel organ warrants this level of restoration, the CPR-28 is provided for those organs requiring the very highest level of quality and reliability in the AO-28.


FEATURES:

* Premium quality circuit board construction
* Ground plane shielding over sensitive circuitry areas
* Long life / high temperature rated electrolytic capacitors
* Rugged standoff mounting of wirewound resistors
* New tone and perc cutoff controls included


Learn More

Add to Wishlist | Add to Compare

EIS-122 ELECTRONIC MOTOR CONTROL RELAY
$93.00

Originally developed by Electronic Instrument Service, the EIS-122 provides a silent and extremely reliable alternative to the old style electromechanical relays originally supplied in Leslies utilizing 122 type amplifiers. Ideal for use in studio, church, and professional applications where quiet switching or ultimate reliability is essential.


These units are fully compatible with existing stock Leslie control circuits and therefore require no changes at the console for standard operation. Leslies equipped with the Trek II electronic relay, which are used in the basic 2 speed mode, may be freely mixed with Leslies in the same family still using an original electromechanical relay.


For those wishing for more than basic relay replacement, both units also have the capability to add brake-to-off and coast-to-off functions without additional wiring from the console. To utilize these advanced features, a suitable 3 position switch must be supplied by the installer. Three position versions of the TS-2 are available pre-wired specifically for this purpose.



FEATURES:
* Easy installation
* Eliminates electrical and mechanical switching  noise
* Greatly reduced 122 switching lag
* 122 control tube is eliminated
* Arc suppression capacitors are eliminated 
* Microprocessor based design provides advanced features, while retaining simple operation
* Fully enclosed



Leslie models: 122, 122A, 122RV, 122V, 142, 222, 222RV and 242 etc.


Learn More

Add to Wishlist | Add to Compare

EIS-147 ELECTRONIC MOTOR CONTROL RELAY
$93.00

Originally developed by Electronic Instrument Service, the EIS -147 provides a silent and extremely reliable alternative to the old style electromechanical relays originally supplied in Leslies 147, and 251 type amplifiers. Ideal for use in studio, church, and professional applications where quiet switching or ultimate reliability is essential.


These units are fully compatible with existing stock Leslie control circuits and therefore require no changes at the console for standard operation. Leslies equipped with the Trek II electronic relay, which are used in the basic 2 speed mode, may be freely mixed with Leslies in the same family still using an original electromechanical relay.


For those wishing for more than basic relay replacement, both units also have the capability to add brake-to-off and coast-to-off functions without additional wiring from the console. To utilize these advanced features, a suitable 3 position switch must be supplied by the installer. Three position versions of the TS-2 are available pre-wired specifically for this purpose.



FEATURES:
* Easy installation
* Eliminates electrical and mechanical switching  noise
* Arc suppression capacitors are eliminated 
* Microprocessor based design provides advanced features, while retaining simple operation
* Fully enclosed



Leslie models: 145, 147, 147A, 147RV, 245, 257, 247RV, 251, and 351


Learn More

Add to Wishlist | Add to Compare

AO-28 pre amp filter capacitor can set
$95.90
Custom made filter can cap set for the Hammond AO-28 pre amp (B3/C3/A100/D100/RT3)

* 50-30-30-10
* 40-40-30 Learn More

Add to Wishlist | Add to Compare

9 Item(s) Show per page
View as: Grid  List  Sort by Set Ascending Direction
 

Compare Products

You have no items to compare.

My Cart

You have no items in your shopping cart.

We have tee shirts!